OEM P/N:
ESCT P/N:
PART TYPE:
OEM:
The 3D10-350401-11 (12"FOCUS RING 8.55T(NEST)) is a plasma-facing focus ring used in Tokyo Electron (TEL) etch equipment. Installed around the wafer edge, it shapes plasma behaviour at the boundary of the wafer, supports etch uniformity into the outermost dies, and protects the chuck and chamber hardware beneath it. This variant is a 300mm-class (12") ring configuration.
Focus rings are true consumables: they sit in direct contact with the plasma and erode over accumulated RF hours. Managing their condition is part of normal chamber consumable discipline, because ring wear shows up in the process before it shows up as a mechanical failure.
Rings of this class are machined to tight dimensional tolerances from materials selected for plasma compatibility, commonly high-purity silicon, silicon carbide or quartz depending on the process chemistry. Key characteristics include:
The wafer edge is where uniformity is hardest to hold, and the focus ring is the component that holds it. As a ring erodes, sheath geometry at the edge changes: etch rate, CD and profile in the outer dies drift first, followed by increased particle risk as the ring surface degrades. Replacing rings at the correct interval protects edge yield and keeps chamber matching consistent across a fleet.
ESCT Fab Support supplies the 3D10-350401-11 focus ring as a verified 2nd New OEM-compatible consumable for Tokyo Electron (TEL) etch systems, helping fabs manage consumable cost and availability on current and legacy chambers alike. Our engineers can confirm the correct ring variant against your chamber configuration before you order.
It is a plasma-facing focus ring used in Tokyo Electron (TEL) etch equipment, fitted around the wafer edge to shape plasma behaviour at the boundary of the wafer and protect the surrounding chamber hardware.
It extends the electrical and geometric environment of the wafer slightly beyond its edge, so etch conditions stay consistent right up to the outermost dies, and it shields the chuck and chamber components beneath it from plasma attack.
Yes. The ring erodes with plasma exposure and is replaced on a schedule or at a measured wear limit; running a worn ring degrades edge-die results before it fails mechanically.
Common indicators include edge-die yield loss, drift in edge etch rate or profile, visible erosion, thinning or surface texturing of the ring, and increasing particle counts traced to the wafer edge region.
Yes. As the ring erodes, the plasma sheath at the wafer edge changes shape, which alters etch rate and profile in the outer zone of the wafer.
It is the catalogue designation identifying this specific ring variant and its dimensional configuration. Compatibility should always be confirmed against part number 3D10-350401-11 and your chamber configuration.
Through scheduled inspection at chamber cleans, erosion or thickness measurement, edge yield and etch-uniformity trend review, and particle monitoring.
Yes. Adjacent edge rings, cover rings and chamber surfaces wear in the same environment and are best inspected in the same intervention.
Yes. Ring material, dimensions and configuration should be confirmed against OEM part number 3D10-350401-11 and your tool configuration before installation.
Yes. ESCT supports form, fit and functional verification aligned with OEM requirements before the part ships.
This product is supplied as a 2nd New OEM-compatible part, verified to meet form, fit, and functional requirements aligned with the relevant part number. It is not an original OEM manufacturer part.
The 3D10-350401-11 (12"FOCUS RING 8.55T(NEST)) is a plasma-facing focus ring consumable for Tokyo Electron (TEL) etch equipment. Its condition directly affects edge etch uniformity, edge-die yield and chamber hardware protection, making disciplined inspection and timely replacement a straightforward way to protect process results. Sourcing it from ESCT Fab Support gets you verified quality, reduced lead times, and expert technical support, keeping your equipment stable, efficient, and production-ready.
Disclaimer: This part is supplied by ESCT Fab Support as a new, OEM-compatible second-source component, verified to the form, fit and function of Tokyo Electron part number 3D10-350401-11. It is not an original OEM part and is not sold as one. It is not manufactured by, endorsed by, or affiliated with Tokyo Electron, and all manufacturer names and part numbers are quoted for identification and compatibility purposes only.
Fill out the form below to request a quote for the part/s you require, making sure to include the OEM part number.
If the part you are looking for is not listed, get in touch and we will try to source it for you through our wide network of partners and suppliers.
We use cookies We use analytics cookies to see how visitors use this site, so we can improve it. They are set only if you accept. Read our Cookie Policy.
