OEM P/N:
ESCT P/N:
PART TYPE:
OEM:
The 0190-03358 DC Power Supply for the Applied Materials Centura II Controller (Same as OEM P/N 0190-25423) is a regulated DC power module engineered to deliver stable, low-noise DC voltage output to the control electronics, processing boards, and subsystem interfaces within the AMAT Centura II platform controller architecture. This power supply supports the computational, I/O, and communication electronics that govern process recipe execution, chamber state management, sensor data processing, and subsystem coordination, where electrical stability is fundamental to maintaining tool reliability, process control accuracy, and uninterrupted production uptime.
In advanced semiconductor fabrication environments, controller electronics depend on clean, well-regulated DC power rails to execute precise, deterministic process control functions. Any instability in the controller power supply (including voltage ripple, output sag under load, transient noise, or regulation drift) can result in control board malfunctions, communication errors, process recipe interruptions, unexpected tool alarms, or loss of chamber state integrity. The Centura II Controller DC Power Supply is designed to maintain tight voltage regulation, solid current capacity, and electrical noise suppression across the full range of controller operating conditions.
Designed as a functional equivalent to Applied Materials OEM part number 0190-25423, this unit provides OEM-aligned form, fit, and function, enabling clean integration into the Centura II controller enclosure without requiring system redesign, wiring modification, or extended tool requalification.
The Centura II platform controller relies on stable, regulated DC power across multiple voltage rails to sustain reliable operation of the distributed control electronics that manage process chambers, robot systems, vacuum subsystems, gas delivery, and safety interlocks. The DC power supply serves as the primary power source for controller board assemblies, supporting:
Because the Centura II controller operates under continuous process cycling conditions with tight timing and sequencing requirements, stable DC power delivery prevents control errors, communication dropouts, or unintended process state transitions that can impact wafer processing outcomes.
The DC power supply is engineered to maintain consistent output voltage across dynamic controller load conditions, holding performance steady during fluctuating board-level power demand across the full range of Centura II controller operating states.
Key performance benefits include:
Maintaining regulation stability is critical to preventing erratic controller behaviour, process sequencing errors, or unintended chamber state changes caused by power rail instability.
Electrical noise on DC control power rails can propagate into sensitive digital logic, communication circuits, and sensor interfaces, causing intermittent faults, signal errors, or data corruption.
The power supply incorporates:
These features preserve signal integrity, reliable process control execution, and stable communication across the Centura II controller subsystem network.
The Centura II controller architecture requires regulated power across multiple DC voltage rails to support the diverse board-level power requirements of the controller electronics.
The power supply provides:
Multi-rail compatibility gives reliable power delivery to all controller board assemblies without output interaction or regulation compromise under varied load profiles.
Designed for 24/7 fab operation across multi-shift production cycles, the Centura II Controller DC Power Supply supports extended runtime under sustained electrical and thermal load, featuring:
These attributes reduce the likelihood of thermally induced degradation, premature electrical wear, or intermittent power faults over the assembly’s service life.
The Centura II controller DC power supply underpins the reliable operation of every process control function executed by the platform, from recipe management and chamber state sequencing to robot coordination and safety interlock monitoring. Controller power stability therefore has a broad and substantial indirect impact on tool uptime, process repeatability, and yield.
A degraded or unstable controller DC power supply may contribute to:
Replacing an ageing or unstable Centura II Controller DC Power Supply with a verified 0190-03358 replacement restores power rail stability, protects controller board assets, and supports predictable, reliable tool operation.
Ageing internal components, particularly electrolytic capacitors and voltage regulator circuits, may cause output voltage to drift or sag under load over time.
Symptoms include:
Degraded output filter capacitors or switching circuit components can allow increased ripple voltage to propagate onto controller power rails.
Potential effects:
Prolonged operation under sustained thermal and electrical load degrades internal power supply components over time, particularly in continuous-duty fab environments.
Indicators include:
Degradation of internal current limiting or protection circuits may result in nuisance protection trips or, conversely, insufficient fault protection for connected controller boards.
Symptoms include:
Replacement of the Centura II Controller DC Power Supply should follow OEM-approved electrical safety, ESD handling, and cleanroom protocols for safe installation and correct controller system requalification.
Following replacement, it is recommended to perform a full controller functional check, including process recipe loading, chamber communication verification, and I/O subsystem confirmation, before returning the Centura II to production wafer processing.
As the Centura II platform ages, OEM spare-part availability for controller power assemblies becomes increasingly constrained, with longer lead times and escalating costs creating downtime risk for fabs relying on this platform. ESCT Fab Support provides a trusted alternative sourcing pathway for critical AMAT Centura II controller power components.
Our objective is to minimise downtime, control maintenance costs, and sustain long-term tool performance across your AMAT Centura II platform fleet.
This power supply is designed for the Applied Materials Centura II platform controller, providing regulated DC power to the controller board assemblies that manage process execution, chamber control, robot coordination, and safety systems.
The 0190-03358 and 0190-25423 are functionally equivalent parts. The 0190-25423 is an alternative OEM part number for the same DC power supply assembly, and units supplied under 0190-03358 are compatible replacements for either part number.
This product is supplied as a 2nd New OEM-compatible assembly, verified to meet form, fit, and functional requirements aligned with AMAT OEM part numbers 0190-03358 and 0190-25423.
Degradation can cause voltage regulation drift, increased ripple noise, controller board logic errors, communication faults, process interruptions, or unplanned tool downtime.
Yes. Where applicable, DC output voltage verification and load regulation checks can be performed prior to dispatch to confirm power supply performance.
Repair and refurbishment options may be available depending on failure mode and unit condition. Contact our technical team for assessment.
Lead times depend on inventory availability, but expedited shipping options are available to minimise controller downtime and support urgent production recovery.
The DC Power Supply for the Applied Materials Centura II Controller (OEM 0190-03358, Same as 0190-25423) is a mission-critical power component that sustains the regulated, low-noise DC power delivery required for reliable Centura II controller operation. By maintaining tight voltage regulation, low ripple output, and continuous-duty electrical stability, it directly supports accurate process control execution, reliable subsystem communication, and consistent tool uptime across demanding semiconductor fabrication environments.
Sourcing through ESCT Fab Support provides verified quality, faster availability, lifecycle support, and semiconductor-focused technical expertise, so your AMAT Centura II platforms stay operationally stable, process-ready, and production-capable.
Disclaimer: This part is supplied by ESCT Fab Support as an OEM-compatible replacement component, verified to the form, fit and function of Applied Materials part number 0190-03358. It is not an original OEM part and is not sold as one. It is not manufactured by, endorsed by, or affiliated with Applied Materials, and all manufacturer names and part numbers are quoted for identification and compatibility purposes only.
Fill out the form below to request a quote for the part/s you require, making sure to include the OEM part number.
If the part you are looking for is not listed, get in touch and we will try to source it for you through our wide network of partners and suppliers.
