OEM P/N:
ESCT P/N:
PART TYPE:
OEM:
The 0020-84222 Gripper Finger, Long, Slotted, Conductive (OEM P/N 0020-84222, ESCT P/N ES227-0076) is a precision-engineered wafer handling component used within Applied Materials robotic transfer systems, designed to support secure wafer engagement, conductive discharge control, and repeatable end-effector performance in high-throughput semiconductor manufacturing environments.
In some configurations, the 0020-84222 may support robotic handling environments associated with waferloader OPM, stepper wafer transfer applications, auto loader modules, and broader wafer auto handling architectures where conductive end-effector precision is critical.
Installed as part of the robot end-effector assembly, this long slotted conductive gripper finger supports controlled wafer pickup, retention, and release during transfers between load locks, transfer chambers, and process modules. Its geometry and conductive material properties help support both precise mechanical handling and electrostatic management, both of which are critical in contamination-sensitive and yield-driven wafer processing environments.
Because robotic wafer handling systems operate under tight tolerances and sustained cycle loads, wear, dimensional drift, conductivity degradation, or contact surface damage in gripper fingers can contribute to transfer instability, wafer slip risk, electrostatic issues, or increased particle generation. The 0020-84222 is designed to support reliable long-cycle performance under demanding fab conditions.
The 0020-84222 functions as a critical end-effector contact and handling component within robotic wafer transfer assemblies.
Core functions include:
In many Applied Materials systems, this gripper finger may operate alongside related end-effector and robotic components such as 3300-91163, 0020-83583, 0020-84223, 0190-76129, and 0020-76111, supporting coordinated handling performance across the robotic subsystem.
The gripper finger directly influences wafer handling reliability.
Key performance characteristics include:
Reliable gripper performance is critical to transfer consistency and yield protection.
Dimensional precision is central to reliable end-effector operation.
Performance attributes include:
Even minor geometry changes can affect grip consistency and robot calibration.
Conductive properties are critical to both handling and electrostatic control.
Durability and performance features may include:
Material integrity directly influences both handling reliability and electrostatic performance.
Depending on tool configuration, conductive gripper implementations may also interface with PEEK waferloader assemblies, hollow gripper configurations, or adjacent vacuum hub hardware used in robotic transfer subsystems.
The 0020-84222 may operate alongside related handling components including:
Together these components support wafer retention accuracy, alignment repeatability, and long-term transfer reliability.
Some applications may also involve integration within black waferloader platforms or other OPM robotic handling configurations supported through broader semiconductor maintenance services.
The 0020-84222 is directly tied to wafer handling reliability and defect-sensitive transfer performance.
Potential impacts of wear or degradation include:
Replacing a worn gripper finger can restore transfer stability and reduce handling-related yield risk.
Repeated handling cycles may alter contact surfaces or dimensions.
Indicators include:
Material aging or wear may affect conductive performance.
Symptoms may include:
Wear-related degradation may increase contamination risk.
Indicators include:
Wear in the 0020-84222 may also increase stress on associated components such as 3300-91163, 0020-83583, or 0020-76111, particularly where tolerances are tightly coupled.
To support best performance:
The 0020-84222 Gripper Finger, Long, Slotted, Conductive is an Applied Materials OEM part.
Key considerations:
Maintaining strategic inventory of the 0020-84222 and related components such as 3300-91163, 0020-84223, 0190-76129, and 0020-83583 can help reduce downtime exposure and improve maintenance readiness.
It supports secure wafer gripping, conductive contact performance, and repeatable robotic wafer handling within Applied Materials systems.
Conductive material helps support electrostatic discharge management, reducing charge-related handling risk in sensitive wafer transfer environments.
Typical indicators include:
Yes. Degraded gripper condition can contribute to transfer faults, contamination risk, and wafer handling defects that may affect yield.
Yes. Geometry wear or fitment drift can influence transfer repeatability and calibration stability.
Depending on application severity and cycle volume, it is often managed as a wear-sensitive spare component.
Yes. ESCT supports dimensional, material, and compatibility verification aligned with OEM requirements.
Depending on availability, associated components such as 3300-91163, 0020-84223, and related handling hardware may also be supported.
The ESCT part number for this component is ES227-0076.
This product is supplied as a 2nd New OEM-compatible assembly, verified to meet form, fit, and functional requirements aligned with OEM P/N 0020-84222. It is not an original OEM manufacturer part.
The 0020-84222 Gripper Finger, Long, Slotted, Conductive is a mission-critical wafer handling component supporting grip stability, conductive performance, transfer repeatability, and uptime in Applied Materials robotic systems.
Its condition, geometry, and integration with surrounding end-effector hardware can directly influence handling reliability, yield protection, and equipment performance.
Sourcing through ESCT Fab Support provides verified quality, faster availability, and semiconductor-focused technical expertise to help maintain reliable, production-ready robotic handling performance.
Disclaimer: This part is supplied by ESCT Fab Support as a new, OEM-compatible second-source component, verified to the form, fit and function of Applied Materials part number 0020-84222. It is not an original OEM part and is not sold as one. It is not manufactured by, endorsed by, or affiliated with Applied Materials, and all manufacturer names and part numbers are quoted for identification and compatibility purposes only.
Fill out the form below to request a quote for the part/s you require, making sure to include the OEM part number.
If the part you are looking for is not listed, get in touch and we will try to source it for you through our wide network of partners and suppliers.
We use cookies We use analytics cookies to see how visitors use this site, so we can improve it. They are set only if you accept. Read our Cookie Policy.
